CNC Machines for Titanium Machining

CNC equipment for high-precision titanium machining

Titanium is one of the most demanding materials to machine: it has low thermal conductivity, which concentrates heat in the cutting zone, and it tends to cause vibration if the machine is not rigid enough. It requires lower cutting speeds and controlled feeds compared with other metals.

Challenges and solutions in CNC titanium machining

The main challenges when machining titanium are accelerated tool wear, localized heat generation and the risk of vibration in thin-walled parts. A rigid machine with sufficient power and good feed control helps mitigate these problems, although the final result also depends on the tool and the cutting parameters used.

Vurcon machines recommended for titanium parts

Our machining centers and CNC lathes with the highest power within each series are the most suitable for working titanium, always adapting the tool and cutting parameters to the tool manufacturer's recommendations for this material.

• Rigid structures to reduce vibration
• High spindle power depending on the model
• Numerical control to program controlled feeds

Advantages of CNC technology in the titanium industry

Numerical control makes it possible to program constant feeds and cutting speeds, which is especially important with titanium to prevent the tool from overheating and to hold the part tolerance.

Frequently asked questions about CNC titanium machining

Is any machining center suitable for titanium?

It is not advisable: a model with sufficient power and rigidity is recommended. Check with our technical team which model best suits your part.

What tolerance can be achieved when machining titanium?

It depends on the machine, the tool and the specific process. Our technical team will inform you about the capabilities of each model for your application.

Does titanium require special tools?

Yes, specific tools are recommended for this material, different from those used for aluminum or carbon steel.