Which CNC machine do you need? It depends on the part: a multi-metre railway axle, a wind flange, a hydraulic rod or a mould insert each call for different lathes and machining centres. Vurcon covers everything from cycle and slant bed lathes to large-format lathes with Ø1,850 mm swing and 8,000 mm between centres, plus vertical, 5-axis and double column machining centres.
Choose your industry to see typical parts, machining challenges and the machines we recommend, with their actual capacities. If your part does not fit any of them, send us the drawing and we will propose a configuration.
RailwayAxles, wheels, brake discs and bogie frames on large-format lathes and double column machining centres.Energy & windFlanges, rotor shafts, hubs and slewing rings on large-swing lathes and BT50 double column centres.MiningRollers, shafts, cylinders and gear rings for mining maintenance on PL63, PL80 and large-format lathes.HydraulicsCylinders, rods, barrels and glands with Ø104–142 mm spindle bores and slant bed lathes.AutomotiveTurned and milled series parts on SBL slant bed lathes and VL vertical machining centres.Mould & diePlates, cavities and electrodes on VL vertical centres, 20,000 rpm 5-axis and BT50 double column.AerospaceStructural parts on 20,000 rpm 5-axis, long parts and tooling on double column machining centres.Job shopsOne-offs and short runs on EL cycle lathes, PL CNC lathes and VL vertical machining centres.
Tell us which part you need to machine
Reply within 24 business hours · No obligation