Vurcon VL-106 machining center
Sectores en los cuales se utiliza:
ARMAMENTO
EDUCACIÓN / FORMACIÓN
FABRICANTE DE HERRAMIENTA INDUSTRIAL
MANTENIMIENTO
MECANIZADO GENERAL
MOLDE / MATRIZ / OTROS
SERVICIO DE INGENIERÍA Y FABRICACIÓN
Physical characteristics
Ref.: VL-106
| Work table (WxL) | 600x1200 |
| X/Y/Z axis travel | 1000/ 620/ 630 |
| Speed range | 20 - 10000 |
Standard configuration
- Linear guides and roller skates in the X/Y/Z axes
- Pretensioned ball screws
- Rigid threading
- Workpiece Cooling System
- Heat exchanger in the electrical panel
- Auto power off
- Complete fairing
- Oil collector guides
- Air seal on the spindle
- Automatic lubrication system
- RS232 interface
- Air gun
- electronic steering wheel
- Leveling plugs
- CE marking
Data sheet
Data sheet
| Characteristics | ||
| Brand | VURCON | |
|---|---|---|
| Work table (WxL) | mm | 600x1200 |
| Control | FANUC 0i MF | |
| X axis travel | mm | 1000 |
| Y axis travel | mm | 620 |
| Z axis travel | mm | 630 |
| Max load admitted on the work table | kg | 1000 |
| Spindle-table distance | mm | 110 - 740 |
| T-slots | mm | 5 slots/18 slots |
| Distance between slots | mm | 100 |
| Main spindle cone | BT40 | |
| Column distance - spindle center | mm | 667 |
| Speed range | rpm | 20 - 10000 |
| main spindle transmission | straps | |
| Main engine power at S6 | kW | fifteen |
| Cone balancing | G1 | |
| Spindle precision | mm | ±0.005 |
| Dynamic precision | mm | ±0.003 |
| Standard tool holder | MSA403 BT40 | |
| X axis servomotor power | kW | 3 |
| Y axis servomotor power | kW | 3 |
| Z axis servomotor power | kW | 3 |
| X axis rapid feed | m/min | 36 |
| Y axis rapid feed | m/min | 36 |
| Z axis rapid feed | m/min | 32 |
| Work progress | mm/min | 12000 |
| Tool magazine type | Double arm | |
| Tool changer type | Random | |
| Tool capacity | pc | 24 |
| Day. max. of tools with adjacent tool | mm | 78 |
| Day. max without adjacent tool | mm | 120 |
| Max weight supported tool | kg | 8 |
| Max length of tool admitted | mm | 300 |
| Tire consumption | kg | 6 - 8 |
| Electrical consumption | kva | twenty |
| Required power | 3-380V±10% 50Hz | |
| Coolant pump flow | l/min | 30 |
| Optimal ambient temperature range | º | 0 - 40 |
| Optimum ambient humidity | % | 20 - 80 |
| Fairing type | Complete | |
| X/Y/Z positioning accuracy | mm | ±0.008 |
| X/Y/Z repositioning precision | mm | ±0.005 |
| Dimensions | mm | 2850x2450x2850 |
| Weight | kg | 7600 |
Data sheet
| Characteristics | ||
| Brand | VURCON | |
|---|---|---|
| Work table (WxL) | mm | 700x1400 |
| Control | FANUC 0i MF | |
| X axis travel | mm | 1200 |
| Y axis travel | mm | 700 |
| Z axis travel | mm | 700 |
| Max load admitted on the work table | kg | 800 |
| Spindle-table distance | mm | 110 - 740 |
| T-slots | mm | 5 slots/18 slots |
| Distance between slots | mm | 100 |
| Main spindle cone | BT40 | |
| Column distance - spindle center | mm | 667 |
| Speed range | rpm | 20 - 10000 |
| main spindle drive | straps | |
| Main engine power at S6 | kW | fifteen |
| Cone balancing | G1 | |
| Spindle precision | mm | ±0.005 |
| Dynamic precision | mm | ±0.003 |
| Standard tool holder | MSA403 BT40 | |
| X axis servomotor power | kW | 3 |
| Y axis servomotor power | kW | 3 |
| Z axis servomotor power | kW | 3 |
| X axis rapid feed | m/min | 36 |
| Y axis rapid feed | m/min | 36 |
| Z axis rapid feed | m/min | 32 |
| Work progress | mm/min | 12000 |
| Tool magazine type | Double arm | |
| Tool changer type | Random | |
| Tool capacity | pc | 24 |
| Day. max. of tools with adjacent tool | mm | 78 |
| Day. max without adjacent tool | mm | 120 |
| Max weight supported tool | kg | 8 |
| Max length of tool admitted | mm | 300 |
| Tire consumption | kg | 6 - 8 |
| Electrical consumption | kva | twenty |
| Required power | 3-380V±10% 50Hz | |
| Coolant pump flow | l/min | 30 |
| Optimal ambient temperature range | º | 0 - 40 |
| Optimum ambient humidity | % | 20 - 80 |
| Fairing type | Complete | |
| X/Y/Z positioning accuracy | mm | ±0.008 |
| X/Y/Z repositioning precision | mm | ±0.005 |
| Dimensions | mm | 2850x2450x2850 |
| Weight | kg | 7600 |
Data sheet
| Characteristics | ||
| Brand | VURCON | |
|---|---|---|
| Work table (WxL) | mm | 700x1600 |
| Control | FANUC 0i MF | |
| X axis travel | mm | 1400 |
| Y axis travel | mm | 700 |
| Z axis travel | mm | 700 |
| Max load admitted on the work table | kg | 1100 |
| Spindle-table distance | mm | 150-850 |
| T-slots | mm | 5-18 |
| Distance between slots | mm | 125 |
| Main spindle cone | BT50 | |
| Column distance - spindle center | mm | 766 |
| Speed range | rpm | 20 - 6000 |
| main spindle drive | straps | |
| Main engine power at S6 | kW | 18.5 |
| Cone balancing | G1 | |
| Spindle precision | mm | ±0.005 |
| Dynamic precision | mm | ±0.007 |
| Standard tool holder | MSA403 BT50 | |
| X axis servomotor power | kW | 3 |
| Y axis servomotor power | kW | 3 |
| Z axis servomotor power | kW | 3 |
| X axis rapid feed | m/min | 24 |
| Y axis rapid feed | m/min | 24 |
| Z axis rapid feed | m/min | twenty |
| Work progress | mm/min | 6000 |
| Tool magazine type | MANIPULATOR | |
| Tool changer type | Random | |
| Tool capacity | pc | 24 |
| Day. max. of tools with adjacent tool | mm | 110 |
| Day. max without adjacent tool | mm | 220 |
| Max weight supported tool | kg | fifteen |
| Max length of tool admitted | mm | 350 |
| Tire consumption | kg | 6 - 8 |
| Electrical consumption | kva | twenty |
| Required power | 3-380V±10% 50Hz | |
| Coolant pump flow | l/min | 40 |
| Optimal ambient temperature range | º | 0 - 40 |
| Optimum ambient humidity | % | 20 - 80 |
| Fairing type | Complete | |
| X/Y/Z positioning precision | mm | ±0.008 |
| X/Y/Z repositioning precision | mm | ±0.005 |
| Dimensions | mm | 3800(+1400 chip conveyor) ×2860×3160mm |
| Weight | kg | 11000 |
Data sheet
| Characteristics | ||
| Brand | VURCON | |
|---|---|---|
| Work table (WxL) | mm | 850x1700 |
| Control | FANUC 0i MF | |
| X axis travel | mm | 1500 |
| Y axis travel | mm | 850 |
| Z axis travel | mm | 850 |
| Max load admitted on the work table | kg | 1600 |
| Spindle-table distance | mm | 120 - 970 |
| T-slots | mm | 5-18-125 + 2-18-100 |
| Distance between slots | mm | 125 + 100 |
| Main spindle cone | BT50 | |
| Column distance - spindle center | mm | 935 |
| Speed range | rpm | 20 - 6000 |
| Main engine power at S6 | kW | 18.5 |
| Cone balancing | G1 | |
| Spindle precision | mm | ±0.005 |
| Dynamic precision | mm | ±0.007 |
| Standard tool holder | MSA403 BT50 | |
| X axis servomotor power | kW | 3 |
| Y axis servomotor power | kW | 2 |
| Z axis servomotor power | kW | 3 |
| X axis rapid feed | m/min | 24 |
| Y axis rapid feed | m/min | 24 |
| Z axis rapid feed | m/min | fifteen |
| Work progress | mm/min | 8000 |
| Tool magazine type | Arm | |
| Tool changer type | Random | |
| Tool capacity | pc | 24 |
| Day. max. of tools with adjacent tool | mm | 110 |
| Max weight supported tool | kg | fifteen |
| Max length of tool admitted | mm | 4.5 |
| Tire consumption | kg | 6 - 8 |
| Electrical consumption | kva | 35 |
| Required power | 380V±10% 50Hz | |
| Coolant pump flow | l/min | 40 |
| Optimal ambient temperature range | º | 10 - 40 |
| Optimum ambient humidity | % | 20 - 80 |
| Fairing type | Complete | |
| X/Y/Z positioning accuracy | mm | ±0.010 |
| X/Y/Z repositioning precision | mm | ±0.005 |
| Dimensions | mm | 4100+1400(chip extractor)×3100×3380 |
| Weight | kg | 15800 |
Data sheet
| Characteristics | ||
| Brand | VURCON | |
|---|---|---|
| Work table (WxL) | mm | 400x850 |
| Control | FANUC 0i MF | |
| X axis travel | mm | 650 |
| Y axis travel | mm | 400 |
| Z axis travel | mm | 500 |
| Max load admitted on the work table | kg | 400 |
| Spindle-table distance | mm | 100-600 |
| T-slots | mm | 5-18 |
| Distance between slots | mm | 100 |
| Main spindle cone | BT40 | |
| Column distance - spindle center | mm | 623 |
| Speed range | rpm | 20-10000 |
| main spindle drive | straps | |
| Main engine power at S6 | kW | fifteen |
| Cone balancing | G1 | |
| Spindle precision | mm | ±0.008 |
| Dynamic precision | mm | ±0.004 |
| Standard tool holder | MSA403 BT40 | |
| X axis servomotor power | kW | 1.2 |
| Y axis servomotor power | kW | 1.2 |
| Z axis servomotor power | kW | 2.5 |
| X axis rapid feed | m/min | 48 |
| Y axis rapid feed | m/min | 48 |
| Z axis rapid feed | m/min | 32 |
| Work progress | mm/min | 10000 |
| Tool magazine type | Double arm | |
| Tool changer type | Random | |
| Tool capacity | pc | 24 |
| Day. max. of tools with adjacent tool | mm | 80 |
| Day. max without adjacent tool | mm | 120 |
| Max weight supported tool | kg | 8 |
| Max length of tool admitted | mm | 300 |
| Tire consumption | kg | 6-8 |
| Electrical consumption | kva | twenty |
| Required power | 380V±10% 50Hz | |
| Coolant pump flow | l/min | 30 |
| Optimal ambient temperature range | º | 0-40 |
| Optimum ambient humidity | % | 20-80 |
| Fairing type | Complete | |
| X/Y/Z positioning accuracy | mm | ±0.008 |
| X/Y/Z repositioning precision | mm | ±0.004 |
| Dimensions | mm | 2100x2300x2700 |
| Weight | kg | 4100 |
Data sheet
| Characteristics | ||
| Brand | VURCON | |
|---|---|---|
| Work table (WxL) | mm | 500x1000 |
| Control | FANUC 0i MF | |
| X axis travel | mm | 850 |
| Y axis travel | mm | 500 |
| Z axis travel | mm | 550 |
| Max load admitted on the work table | kg | 500 |
| Spindle-table distance | mm | 100 - 650 |
| T-slots | mm | 1-5 |
| Distance between slots | mm | 100 |
| Main spindle cone | BT40 | |
| Column distance - spindle center | mm | 582 |
| Speed range | rpm | 20-10000 |
| Main engine power at S6 | kW | fifteen |
| Cone balancing | G1 | |
| Spindle precision | mm | ±0.005 |
| Dynamic precision | mm | ±0.007 |
| Standard tool holder | MSA403 BT40 | |
| X axis servomotor power | kW | 1.8 |
| Y axis servomotor power | kW | 1.8 |
| Z axis servomotor power | kW | 2.5 |
| X axis rapid feed | m/min | 48 |
| Y axis rapid feed | m/min | 48 |
| Z axis rapid feed | m/min | 32 |
| Work progress | mm/min | 12000 |
| Tool magazine type | Double arm | |
| Tool changer type | Random | |
| Tool capacity | pc | 24 |
| Day. max. of tools with adjacent tool | mm | 78 |
| Day. max without adjacent tool | mm | 120 |
| Max weight supported tool | kg | 8 |
| Max length of tool admitted | mm | 300 |
| Tire consumption | kg | 6-8 |
| Electrical consumption | kva | twenty |
| Required power | 380V±10% 50Hz | |
| Coolant pump flow | l/min | 40 |
| Optimal ambient temperature range | º | 0-40 |
| Optimum ambient humidity | % | 20-80 |
| Fairing type | Complete | |
| X/Y/Z positioning accuracy | mm | ±0.008 |
| X/Y/Z repositioning precision | mm | ±0.004 |
| Dimensions | mm | 2460×2355×2860 |
| Weight | kg | 5500 |
Data sheet
| Characteristics | ||
| X/Z axis travel | mm | 150/ 550 |
|---|---|---|
| X axis travel | mm | 150 |
| Z axis travel | mm | 550 |
| X/Z axis rapid feeds | m/min | 6/ 8 |
| Max diameter turning | mm | 360 |
| Max diameter dump truck | mm | 180 |
| Max diameter cutting | mm | 220 |
| Max length cutting | mm | 540 |
| Distance between points | mm | 690 |
| bar step | mm | ø 57 |
| Main engine power | kW | 5.5 |
| Main spindle speed | rpm | 140-3000 |
| spindle nose | ISO 702/I A2-6 | |
| tailstock diameter | mm | 55 |
| Counterpoint route | mm | 120 |
| Tailstock morse taper | MT No. 4 | |
| Dimensions (Length x width x height) | mm | 2150x1260x1600 |
| Weight | kg | 1700 |
Data sheet
| Characteristics | ||
| Brand | VURCON | |
|---|---|---|
| X axis travel | mm | 210 |
| Z axis travel | mm | 560 |
| Max diameter turning | mm | 600 |
| Max diameter dump truck | mm | 360 |
| Max diameter cutting | mm | 470 |
| Max length cutting | mm | 650 |
| Main engine power | kW | 11/ 15 |
| Main spindle speed | rpm | 50-4500 |
| spindle nose | A2-6 | |
| Spindle bearing diameter | mm | 65 |
| bar step | mm | 51 |
| Plate size | Inch | 8 |
| plate hole | mm | 10" |
| X/Z axis rapid feeds | m/min | 30 |
| X/Z axis guides | Linear | |
| Turret capacity | 8 | |
| Square drive size | mm | 25x25 |
| Max length turning | mm | 500 |
| Counterpoint route | mm | 450 |
| Tailstock morse taper | TM No. 5 | |
| Tailstock movement type | Motorized | |
| Spindle opening | mm | fifty |
| Guide type | Linear | |
| Positioning accuracy for X/Z | mm | ±0.008 |
| Positioning repeatability for X/Z | mm | ±0.004 |
| Chip extractor | Chain type | |
| Dimensions (Length x width x height) | mm | 2700x1890x1880 |
| Weight | kg | 4500 |
| Main servo motor power | kW | 11/15 |
| X axis servomotor power | kW | 1.8 |
| Z axis servomotor power | kW | 1.8 |
Data sheet
| Characteristics | ||
| Brand | VURCON | |
|---|---|---|
| X axis travel | mm | 210 |
| Z axis travel | mm | 560 |
| Max diameter turning | mm | 600 |
| Max diameter dump truck | mm | 360 |
| Max diameter cutting | mm | 470 |
| Max length cutting | mm | 650 |
| Main engine power | kW | 11/ 15 |
| Main spindle speed | rpm | 50-4500 |
| spindle nose | A2-6 | |
| Spindle bearing diameter | mm | 65 |
| bar step | mm | 51 |
| Plate size | Inch | 8 |
| plate hole | mm | 10" |
| X/Z axis rapid feeds | m/min | 30 |
| X/Z axis guides | Linear | |
| Turret capacity | 8 | |
| Square drive size | mm | 25x25 |
| Max length turning | mm | 500 |
| Counterpoint route | mm | 450 |
| Tailstock morse taper | TM No. 5 | |
| Tailstock movement type | Motorized | |
| Spindle opening | mm | fifty |
| Guide type | Linear | |
| Positioning accuracy for X/Z | mm | ±0.008 |
| Positioning repeatability for X/Z | mm | ±0.004 |
| Chip extractor | Chain type | |
| Dimensions (Length x width x height) | mm | 2700x1890x1880 |
| Weight | kg | 4500 |
| Main servo motor power | kW | 11/15 |
| X axis servomotor power | kW | 1.8 |
| Z axis servomotor power | kW | 1.8 |
Data sheet
| Characteristics | ||
| Brand | VURCON | |
|---|---|---|
| Version | 2000 | |
| X axis travel | mm | 250 |
| Z axis travel | mm | 1920 |
| X/Z axis rapid feeds | m/min | 8/12 |
| Max diameter turning | mm | 510 |
| Max diameter dump truck | mm | ø 290 |
| Day. max. horizontal turning 6 positions | mm | ø 460 |
| Distance between points | mm | 2000 |
| bar step | mm | ø 87 |
| Main engine power | kW | 7.5 |
| Main spindle speed | rpm | 2500 |
| plate hole | mm | 82 |
| spindle nose | A2-8 | |
| Turret capacity | 6 | |
| Square drive size | mm | 25x25 |
| Shank diameter hydraulic tailstock | mm | ø 80 |
| tailstock diameter | mm | ø 75 |
| Counterpoint route | mm | 150 |
| Tailstock morse taper | TM No. 5 | |
| Hydraulic tailstock cone | MT5 | |
| Dimensions (Length x width x height) | mm | 4200x2100x2200 |
| Weight | kg |
4400 |
Data sheet
| Characteristics | ||
| Brand | VURCON | |
|---|---|---|
| Version | 1500 | |
| X/Z axis travel | mm | 275/1000 (1500/2000) |
| X axis travel | mm | 275 |
| Z axis travel | mm | 1500 |
| X/Z axis rapid feeds | m/min | 6/ 8 |
| Max diameter turning | mm | 500 |
| Max diameter dump truck | mm | 280 |
| Day. max. horizontal turning 6 positions | mm | 350 |
| bar step | mm | ø 87 |
| Main spindle speed | rpm | 30 - 3000 |
| plate hole | mm | 87 |
| spindle nose | ISO702/A28 | |
| Turret capacity | 4/ 6 | |
| Square drive size | mm | 25x25 |
| Shank diameter hydraulic tailstock | mm | 80 |
| tailstock diameter | mm | 75 |
| Counterpoint route | mm | 150 |
| Tailstock morse taper | TM No. 5 | |
| Hydraulic tailstock cone | MT No. 3 | |
| Coolant pump power | kW | 0.15 |
| Dimensions (Length x width x height) | mm | 3200x1450x1670 |
| Weight | kg | 3200 |
Data sheet
| Characteristics | ||
| Brand | VURCON | |
|---|---|---|
| Version | 2000 | |
| X axis travel | mm | 1000 |
| Z axis travel | mm | 2000 |
| X/Z axis rapid feeds | m/min | 6/ 8 |
| Max diameter turning | mm | ø 500 |
| Max diameter dump truck | mm | ø 280 |
| Day. max. horizontal turning 6 positions | mm | ø 350 |
| bar step | mm | ø 87 |
| Main spindle speed | rpm | 30 - 3000 |
| spindle nose | ISO702/A28 | |
| Turret capacity | 4/ 6 | |
| Square drive size | mm | 25x25 |
| Shank diameter hydraulic tailstock | mm | ø 80 |
| tailstock diameter | mm | ø 75 |
| Counterpoint route | mm | 150 |
| Tailstock morse taper | TM No. 5 | |
| Hydraulic tailstock cone | MT No. 3 | |
| Coolant pump power | kW | 0.15 |
| Dimensions (Length x width x height) | mm | 3700x1450x1670 |
| Weight | kg | 3600 |
Data sheet
| Characteristics | ||
| Brand | VURCON | |
|---|---|---|
| Version | 2000 | |
| X axis travel | mm | 280 |
| Z axis travel | mm | 2000 |
| Max diameter turning | mm | 260 |
| Distance between points | mm | 2000 |
| bar step | mm | 52 |
| Main engine power | kW | 11/ 15 |
| Main spindle speed | rpm | 3500 |
| spindle nose | A2-6 | |
| Turret capacity | 12 | |
| Counterpoint route | mm | 100 |
| Dimensions (Length x width x height) | mm | 3400x1600x2010 |
| Weight | kg | 5300 |
Standard
Standard