Vurcon VL-158 Machining center
Ref.: VL158
| Worktable (WxL) | 850 x 1700 |
| X/Y/Z axes travel | 1500/ 850/ 850 |
| Spindle speed range | 20 - 6000 |
Technical specs
| Characteristics | ||
| Brand | VURCON | |
|---|---|---|
| Worktable (WxL) | mm | 850 x 1700 |
| Control | FANUC 0i MF | |
| X axis travel | mm | 1500 |
| Y axis travel | mm | 850 |
| Z axis travel | mm | 850 |
| Max. loading capacity | Kg | 1600 |
| Spindle-table distance | mm | 120 - 970 |
| T slots | mm | 5-18-125 + 2-18-100 |
| Distance Between T slots | mm | 125 + 100 |
| Spindle hole taper | BT50 | |
| Distance colum - spindle center | mm | 935 |
| Spindle speed range | rpm | 20 - 6000 |
| Main motor power (S6) | kw | 18.5 |
| Spindle part dynamic balance type | G1 | |
| Spindle accuracy | mm | ±0.005 |
| Dynamic precision | mm | ±0.007 |
| Portaherramientas estándar | MSA403 BT50 | |
| X axis servomotor power | kw | 3 |
| Y axis servomotor power | kw | 2 |
| Z axis servomotor power | kw | 3 |
| Rapid X-axis | m/min | 24 |
| Rapid y-axis | m/min | 24 |
| Rapid Z-axis | m/min | 15 |
| Max. feed speed | mm/min | 8000 |
| Tools magazine model | Arm type | |
| Tool changer type | Forward/reversal | |
| Tools capacity | pc | 24 |
| Full tools max. tool diameter | mm | 110 |
| Max. tools allowable weight | Kg | 15 |
| Max. tools allowable length | mm | 4.5 |
| Machine compressed air | Kg | 6 - 8 |
| Machine electricity capacity | Kva | 35 |
| Power requirement | 380V±10% 50Hz | |
| Cooling pump flow rate | l/min | 40 |
| Optimal ambient temperature range | º | 10 - 40 |
| Optimal ambient humidity | % | 20 - 80 |
| Machine shield | Full protect | |
| X/Y/Z Position accuracy | mm | ±0.010 |
| X/Y/Z Reposition accuracy | mm | ±0.005 |
| Machine dimension | mm | 4100+1400(extractor de viruta)×3100×3380 |
| Machine weight | Kg | 15800 |
Standard configuration
- X/Y/Z Linear motion slide way
- Pre-tensioned for 3 axis ball screw
- Rigid tapping
- Workpiece cooling system
- Electrical cabinet heat exchanger
- M30 Automatic power-off system
- All over protection shield
- Oil-water separation
- Spindle air sealing
- Auto lubrication system
- RS232 Interface
- Portable blowing dust air gun
- Manual pulse generator
- Anchor bolts and pads
- CE mark
